M511 Electrical Insulation Putty
Applications:
Molyfast electrical insulation putty is a puttylike electrical grade compound in tape form.
To insulate low-voltage (600 volts and less)connections.To build up cable splices and fill out major irregularities and voids in low-voltage splices (2300 volts and less) in order to obtain a uniform base for further taping. To round out high-voltage connections to gear. To smooth bus bar irregularities. To create a resin dam in resin pressure splices. To create a moisture seal at ground wire exit in high-voltage splices. To moisture seal multi-conductor cable connections.
Features:
Non-corrosive, synthetic rubber.
Excellent electrical properties.
Excellent ageing properties.
Will not dry out.
Applies cleanly without waste.
Working temperatures up to 80°C (176°F) when overwrapped with Vinyl Electrical Tape
Technical properties:
Property |
Testing method |
Typical data |
Elongation at break |
ASTM D 2671 |
≥1000% |
Dielectric strength |
IEC 243 |
≥22kV/mm |
Volume resistance |
IEC 93 |
≥1.0X106Ω•cm |
Dimensions:
3mmX50mmX1500mm
Related information:
The product is supplied as rolls of specified dimensions. Recommend to store in the original packing, protected from moisture, dust, heat and sunlight.
Molypoly is one of the best and leading electrical insulation putty manufacturers and suppliers, who can bring you high-quality electrical insulation putty from our professional factory. Customized service is also offered as you may need.